Share this content on Facebook!
09 Jul 2016
Medical Waste Disposal Tampa Bay
Medical waste needs some look after being discarded properly. The main problem in working with medical waste is the risk of infection. Pathological wastes may have dangerous and contagious infectious agents therefore can laboratory cultures. Sharps (sharp objects like scissors and injections) if mismanaged can insert harmful agents into the bloodstream.

Medical Waste Disposal Tampa Bay

Hazardous wastes really are a category in and by itself however they can overlap with medical waste. What i'm saying is a waste could be medical and unsafe simultaneously. Such medical hazardous waste contains highly poisons like those used in chemotherapy, and therefore are susceptible to special regulations underneath the federal law.

Below I shall describe two ways how such waste ought to be addressed.


Incineration means act of burning the medical hazardous waste. The three main types of incinerators which are used are controlled air, excess air, and rotary kiln.

However controlled-air incineration is the most trusted medical waste incinerator (MWI) technology, now dominates the market for new systems at hospitals as well as other medical facilities.

Thermal processes

Processes that depend on heat i.e. thermal energy to sneak pathogens from the waste these are known as thermal processes. This category is further subdivided into low-heat, medium-heat, and high-heat thermal processes. This further division is important because physical and chemical reactions that occur in thermal processes change drastically at a specific temperature.

Low-heat thermal processes are the types who use heat energy to decontaminate the waste at temperatures that happen to be insufficient to result in chemical breakdown in order to support combustion. Normally, low-heat thermal technologies operate between 200 F to about 350 F (93 C to 177 C).

Medium-heat thermal processes take place at temperatures between 350 F to 700 F (177 C to 370 C) and involve caffeine overview of organic material. These processes are the basis for relatively recent technologies.

High-heat thermal processes generally operate at temperatures including around 1,000 F to 15,000 F (540 C to 8,300 C). This intense heat is supplied by electrical resistance, induction, natural gas, and/or plasma energy.

Waste that is considered both as medical waste and hazardous waste i.e. medical hazardous waste might be particularly tough to take care of, since the majority providers that handle treatment and disposal of medical wastes are not willing to accept hazardous wastes, and vice versa.


There isn't any comment in this page yet!

Do you want to be the first commenter?

New Comment

Full Name:
E-Mail Address:
Your website (if exists):
Your Comment:
Security code: